CCD&CMOS贴合滤光片(CCD&CMOS Filter bonding)

        当我们在手机摄像头、数码相机、数码摄像机、电脑摄像头、安防监控器（CCTV）摄像头、可视电话、可视门铃等需要使用CCD/CMOS数码成像系统时，其成像系统里需安装相对应的光学滤光片时，其常规安装方法：1）使用双面胶直接粘贴在sensor上面；2）使用支架+密封胶固定。本文讲述其第三种方法：使用UV紫外胶直接粘贴在sensor上面

        When we need to use CCD/CMOS digital imaging systems in mobile phone cameras, digital cameras, digital camcorders, computer cameras, CCTV cameras, video phones, video doorbells, etc., and the corresponding optical filters need to be installed in the imaging system, the conventional installation method is: 1) Use double-sided tape to directly stick on top of the sensor; 2) Fix with bracket and sealant. This article describes its third method: using UV glue to directly paste onto the sensor

      相较于上面2种方法，直接使用UV胶贴合其优点有不易脱落，成本低，牢固度高，图像效果更高等特点，本公司使用高品质且与滤光片相对应的匹配的UV胶水，在无尘室中经过UV烤箱中紫外光的充分固化，提高了滤光片的安全性，不会因为整机使用时间相对较长，避免了发生滤光片脱落的风险；使滤光片与sensor之间能够紧密贴合，消除了光在介质之间的反复反射与折射，提高图像的还原效果。

       Compared to the above two methods, directly using UV glue for bonding has the advantages of being less prone to detachment, low cost, high firmness, and higher image quality. Our company uses high-quality UV glue that matches the filter and is fully cured by UV light in a clean room through UV oven, which improves the safety of the filter and avoids the risk of filter detachment due to relatively long machine use time; The filter and sensor can be tightly adhered to each other, eliminating the repeated reflection and refraction of light between media and improving the image restoration effect.